Home > Exhibition > Content

The factor which affects the performance of peristaltic pump tube in pump parts

One of the factors which affects the performance of peristaltic pump tube in pump parts is chemical compatibility.It is necessary to pay attention to the chemical compatibility of the pump delivery fluid to have good pump performance and safety performance.Pipe as the market increasingly - peristaltic pump pump tube which apply on some pump parts are more than 15 kinds now, given that, the user will always find a suitable tube what specific fluid chemical compatibility.

The second factor which affects the performance of peristaltic pump tube in pump parts are pressure, and the appearance of the pump parts extends the application scope of peristaltic pump to an unprecedented application field, including filtration.Pressure sources for a fluid delivery system can vary.

When pushing fluid through a filter or pushing fluid through a flow meter, valve or pump fluid into a pressurized container, this time is the back pressure is produced.Before selecting the tube, the user should first make sure that all the pressure sources in the system have been identified, and the measured values of total system pressure have been obtained.

When choosing pump parts for the peristaltic pump, the user should ensure that the pressure in the system cannot exceed the recommended working pressure of the pump tube.If the pressure is too high, the pump tube will be swollen and the pump head is poorly matched, which can cause excessive wear or failure.When the system pressure greatly exceeds the capacity of the pump tube, it may even burst and expel the fluid, which endangers the safety.

After selecting the pump parts, the pressure should be maintained within the pressure range recommended by the manufacturer.If the system exceeds the maximum working pressure, install a simple pressure relief valve or a pressure switch to prevent excess pressure build-up.At the same time, the application of this pump parts can guarantee safety.

http://www.pump-casting.com/