The Casting Companies

The Casting Companies
Chat Now
Product Details

The Casting Companies introduction

图片4_副本.jpg

Our OEM products are widely used in the industrial.Corrosion-resistant, ferritic-carbidic chrome steel casting with high resistance to abrasive wear. We provide a wide range of wear resistant alloys, including custom alloys to meet specific customer needs. We cast more then 1500 tons of all kinds steel castings annually.


Technical key points

◆ In order to guarantee the required pressure of typical pump casting, when making the technical scheme in casting process, we must ensure the necessary riser pressure and effect of the casting,and control the technological yield of the casting between 50%-55%.

◆ For the two-channel pump body, we usually install several feeding heads in the appropriate parts of the upper side, and in the intersection of hot stream set a certain height of the side riser. If the flange size of the bottom is larger and thicker, to set side riser to feed the shrinkage alone is required.


TECHNOLOGY ADVANTAGES 

◆ We are a innovation-driven company, we have five patents and another 13 patents will be expected to get in short months. 

◆ we are willing to develop all new material only if it’s required in application.

◆ Advantage technology in composition control, especially super low carton steel, stainless steel and duplex stainless steel. 

◆ We cast very good surface of thin-wall castings, which is normally not easy to control for sand castings, but we made suitable technology and are able to guarantee smooth no-defect surface.

◆ All our technology innovation only for one aim--- the best quality, even that means a higher cost and lower production rate.


Why choose us?

1. Stable quality —— Coming from good materials and technic.

2. Lower price —— Not cheapest but the lowest at the same quality.

3. Good service —— Satisfactory service before and after sale.

4. Delivery time —— 30-60 days for mass production.


FAQ

1. What information do you need if I want to get a quotation?

We need to know the material code, casting drawing and machining drawing with specification included. 

2. What’s the maximum weight of castings you can produce?

The maximum weight of castings we can produce is 1.8 tons.

3. Which kinds of NDT methods that your company can provide?

The NDT we provide are PT, MT, UT and RT.

4. Can you list the smelting equipment of your company?

We have 3 models of medium-frequency induction furnaces: 0.5 tons, 2 tons and 3 tons.

Feedback